福斯gleitmo SFL9680固体润滑剂

进口 gleitmo SFL 9680 (Item No. 5650)
3-component, solvent-based solid film lubricant

Description
gleitmo SFL 9680 is an air-drying 3-component solid film lubricant based on a special binder and solvent.
gleitmo SFL 9680 forms a dry lubricating film, which is distinguished by its excellent lubricating effect and high degree of abrasion resistance.

Fields of application
gleitmo SFL 9680 is used primarily for the dry lubrication of rubber materials. gleitmo SFL 9680 leads to very low coefficients of friction thus facilitating the assembly of parts.

Method of application
Mixing ratio:
parts
[wt %] parts
[vol %]
gleitmo SFL 9680 K1 89 90
gleitmo SFL 9680 K2 9 8.3
gleitmo SFL 9680 K3 2 1.7

The mixture of gleitmo SFL 9680 (K1+K2+K3) is ready for use. According to the application requirements it might be suitable to dilute the mixture with an adequate thinner. The workability time of the mixture is approximately 5 hours.
gleitmo SFL 9680 can be applied by spraying or dipping. The parts should be degreased prior to coating. To improve its adhesion on rubber materials, a plasma pre-treatment may prove beneficial.
gleitmo SFL 9680 cures at ambient temperature and forms a lubrication-effective coating. To achieve an enhanced mechanical and chemical resistance of the coating, curing at 100 - 150 °C is required.
Note
Shelf life: 6 months in closed original containers at room temperature.
Features
transparent
temperature range for use: -70/+180 °C short term up to 250 °C
forms a dry, thin lubricant film with a very low coefficient of friction
good adhesion on rubber materials, e.g. NBR, EPDM, VMQ…
largely resistant to water, mineral oil and fuels
exceptional non-stick and separating character